Contacts
Get In Touch
Close

Contacts

48 Toh Guan Road East #06-115 Enterprise Hub Singapore 608586

+65 6734 1438

generalenquiry@asiagreen.com.sg

How to Put Out a Lithium Battery Fire Safely

How to Put Out a Lithium Battery Fire Safely

When a lithium-ion battery or an electric vehicle catches fire, the first instinct is to reach for an extinguisher. Search for a lithium fire extinguisher and you will quickly be told to buy a Class D unit, but for most lithium-ion battery fires that advice is wrong, and acting on it can put your team in danger. This guide explains what genuinely works when a battery or vehicle catches fire, why lithium-ion cells do not fall into Class D, and how to contain a fire you cannot put out.

Quick answer: a battery in thermal runaway cannot reliably be extinguished. The safe response is to cool and contain it, evacuate the area, and call the Singapore Civil Defence Force on 995. A Class D fire extinguisher is not the answer, because it is designed for combustible metal fires such as magnesium, sodium and lithium metal rather than for lithium-ion batteries.

What is a Class D fire extinguisher?

Class D covers fires involving combustible metals: magnesium, titanium, zirconium, sodium, potassium and lithium in its raw metallic form. These fires burn extremely hot and react violently with water, which is why they need a dedicated agent.

Class D extinguishers use a specialist dry powder, often based on graphite, copper or sodium chloride, which forms a crust over the burning metal to smother it and draw off heat. You will find them in foundries, metalworking shops, machining operations and laboratories.

They are not general-purpose units, and they are certainly not what belongs next to a forklift charging bay, where the risk is a battery rather than burning metal. Our lithium-grade fire blanket range is built for that job instead.

Class D and lithium-ion: the mix-up that matters

The confusion is understandable. Lithium appears in the Class D list, and lithium appears in the name of the battery. They are not the same thing.

Lithium metal is a soft, highly reactive metal, and a fire involving it is a genuine Class D event. In a lithium-ion battery, the lithium is bound up in compounds such as lithium cobalt oxide, and the cell also contains a flammable liquid electrolyte. When that cell fails, what burns is the electrolyte and the vented gases, which behaves much more like a flammable liquid fire, with a live electrical hazard on top.

Two practical consequences follow. First, a Class D agent is not formulated for what is actually burning in a battery fire. Second, Class D powders conduct electricity, so using one on an energised battery system introduces a shock risk. Reaching for the wrong unit costs you the only thing that matters in the first minute, which is time.

So how do you put out a lithium battery fire?

So how do you put out a lithium battery fire

Honestly, most of the time you do not. A handheld unit is not the right tool for a pack that is already in thermal runaway.

Thermal runaway sustains itself. The reaction produces its own heat and releases oxygen from the breakdown of the cathode, so starving it of air does not end it. Water is the most effective tool because it removes heat, but it works in the volumes a fire appliance can deliver, not the couple of litres in a handheld extinguisher. Even after visible flames stop, heat stored in the cells frequently causes reignition, which is why damaged electric vehicles are kept under observation for hours.

What that means in practice, on a Singapore warehouse floor or in a condominium car park:

  • A single small device caught in the first seconds can sometimes be dealt with by cooling it heavily with water, or by smothering and isolating it in a containment blanket or bag.
  • A battery pack, forklift battery or vehicle already burning should not be fought with a handheld unit. Evacuate the area, keep people upwind of the smoke, contain the fire if you can do so safely, and call 995.
  • Never use a Class D powder, and never assume the fire is over because the flames have died down.

Why containment beats extinguishing

If the fire cannot be reliably put out, the objective changes. Stop it spreading, protect people and property, and buy time for the fire service. That is containment, and it is the accepted approach to lithium and electric-vehicle fires internationally.

A lithium-grade fire blanket is laid over the burning battery, device or vehicle. It holds the fire, the heat and much of the smoke in one place so the pallets, racking, vehicles or buildings around it do not become the next fuel. Aerosol suppression units and mist lances extend the same principle to enclosed spaces and to packs that need to be attacked from within a cabinet or container.

Asia Green Fire Safe is the exclusive Fire Isolator dealer in Singapore, with an established dealer network in Malaysia. The Fire Isolator range is built specifically for lithium and electric-vehicle risk rather than adapted from kitchen equipment, and our lithium-grade blankets are reusable, with a shelf life of up to 25 years, so they are a long-term fixture rather than a single-use consumable.

What to keep on site

What to keep on site
  • A lithium-grade fire blanket at every charging area and battery store, sized for the largest item you would need to cover.
  • A containment cover or bag for batteries being charged, transported or quarantined after damage.
  • Respiratory protection for anyone who might be exposed to vented gases during an incident.
  • A written procedure that says evacuate, contain only if safe, call 995, and do not approach the pack afterwards.
  • A disposal route for damaged and spent batteries, so they are not sitting in the building waiting to fail. Our guide on why lithium batteries catch fire covers the prevention side, and our lithium battery disposal service clears the stock.

Not sure what your site actually needs? Tell us what you store, charge or park, and we will recommend the right containment setup from the Fire Isolator range.

Frequently asked questions about lithium battery fires

Is a Class D fire extinguisher used for lithium-ion batteries?

No, and this is a common and dangerous mix-up. Class D extinguishers are for combustible metal fires, including lithium metal, magnesium and sodium. The lithium in a lithium-ion battery exists as a compound rather than as combustible metal, so a Class D unit is the wrong tool. Class D agents also conduct electricity, which adds a shock risk around battery systems.

Can you put out a lithium battery fire?

A small battery fire caught very early can sometimes be knocked down, but a pack in full thermal runaway cannot reliably be extinguished, because the reaction sustains itself and reignites. The realistic goal is to cool and contain the fire so it cannot spread, then let it burn out under control while the fire service is on its way.

What type of fire extinguisher is used for an EV fire?

There is no handheld extinguisher that reliably stops an electric-vehicle battery fire. Fire services deal with them using very large volumes of water to cool the pack, or by containing the vehicle. On site, the practical measures are a purpose-made containment blanket and an immediate call to the Singapore Civil Defence Force on 995.

How do you stop thermal runaway?

Once thermal runaway is under way in a cell it cannot be reversed, only managed. Sustained cooling can slow propagation to neighbouring cells, and containment stops the fire and its heat spreading to anything else. Prevention is the only reliable control: correct charging, damage checks, good storage and prompt disposal of spent cells.

What should we keep on site for battery fire risk?

For most warehouses and car parks, that means a lithium-grade fire blanket at charging and battery storage areas, a containment cover or bag for batteries being charged or quarantined, respiratory protection for anyone who may be exposed to the gases, and a clear procedure to evacuate and call 995. Asia Green Fire Safe can advise on the right combination for your risk.

Alex Koh

Alex Koh is a Director of Asia Green Industries and Asia Green Fire Safe Pte Ltd, working in warehousing and materials handling across forklift fleets, industrial battery recycling and lithium battery fire safety. He is a Fire Isolator trained trainer.

Leave a Comment

Your email address will not be published. Required fields are marked *